Directions For Use: Spa Monthly - Fill spa and heat to normal operating temperature. Add sanitizer. Balance alkalinity, then pH. With jets and blowers running, add one bottle of ecoone® SPA monthly directly to spa water. It is good practice to shock your spa weekly or as needed. Use one full bottle of ecoone® SPA monthly every 30 days. Filter Cleanser - Combine one to two caps full of ecoone® FILTER cleanser with up to five gallons of water. Agitate filter to loosen contaminants and allow to soak for at least one hour. Rinse filter thoroughly with fresh water. OneShock™ - With jets running, add one, oneshock™ dissolving packet per 250 gallons of water. Wait 5 minutes, then check chlorine residual. Residual chlorine must read between 2 to 3 ppm.
Super-Chlorination: It is good practice to super-chlorinate each 2 to 4 weeks. To super-chlorinate, add 1/2 oz. (two, oneshock™ dissolving packets) of oneshock™ for each 250 gallons of water. Thoroughly clean spa, vacuum and cycle through filter. Resume program when chlorine residual reads 2 to 3 ppm. This product should be added daily or as necessary to achieve and maintain 2 to 3 ppm residual chlorine. Frequent checks should be made of residual chlorine using a reliable test kit. Allow at least 5 minutes mix time before sampling.
Technical Specifications:
Appearance: Opaque liquid / Free-flowing powder / Dissolving packets
pH range: Neutral
Fragrance: Neutral. None added.
Available sizes: 3 - 8 oz. Monthly, 1 – 8 oz. Filter Cleanser. 1 – 1Lb OneShock™
Ingredients:
Monthly - No ingredients hazardous to humans, animals or plants per CFR 1910
Filter Cleanser - Sodium metasilicate, sodium percarbonate, sodium borate and non-ionic detergents
OneShock™ - Sodium Dichloro-Triazinetrione Dihydrate (Di-Chlor) EPA 7364.-80
Handling and Storage:
Store in a cool, dry place. To maintain product quality and freshness, do not expose to extreme temperature fluctuations, allow the product to freeze or be exposed to prolonged temperatures in excess of 90º F.
